We now have two different models of ramps in our system. While they are very similar models, please note that they differ on how to lock/unlock the leg assembly in Step 3.
View ramp setup/removal instructional video online.
The ramp must NEVER be packed behind the bulkhead with your personal belongings and should be the last item loaded on the trailer.
| Step 1 | Step 2 | |
 |
 |
|
| Position the ramp on the trailer as shown and unfold the leg assembly. | Ensure that the legs rest against the STOP BLOCKS. | |
| Step 3 - BLACK HANDLE | OR | Step 3 - YELLOW BAR |
 |
 |
|
| Ensure the two latches are locked. To lock/unlock the leg assembly, rotate the BLACK HANDLE. | Ensure the YELLOW BAR locks into leg assembly. | |
| Step 4 | Step 5 | |
 |
 |
|
| Slide the ramp backward until the apron rests flat on the trailer floor. Set the legs on the ground. | Ensure the RAIL ENDS are touching the rear of the trailer and the entire APRON is inside the trailer. | |
| Step 6 | ||
 |
||
| Unfold the bottom portion of the ramp until it rests on the ground. The ramp should be used only on a flat, firm surface. | ||
The ramp should be ready for use if these steps are followed.
[Top]
