CAUTION: Use caution when removing the bulkhead, as items may have shifted against the bulkhead during transit.
 |
Step 1: Hold down the red buttons to loosen the loadbars. To further loosen, hold the red button down while compressing the extension arm back into the loadbar. Do this for the top and bottom loadbars. THE BULKHEAD IS NOW LOOSE. |
 |
Step 2: Scoot the bottom of the bulkhead backward allowing it to lean against your U-Pack shipment. |
 |
Step 3: Depress the round silver button and retract the adjustable arm back into the loadbar as many adjustment positions as possible. Do this for the top and bottom loadbars. |
 |
Step 4: Separate the loadbars by sliding them apart. Do this for the top and bottom loadbars. The panels are now ready to be removed individually. Safely remove each panel to a dry place. |
Hydraulic Bulkhead (square bars) Setup Instructions
[Top]
